Product Code : 01
Ensure surface throughly dry, clean and free from all loose dirt, grease, fungi, the Alltratek Putty can be cleaned by wire or coir brush, sandstone followed by water jetting if required. Apply the cote of Alltratek Putty wet putty and allow it dry for at least 2-3 hours, then apply 2nd coat allow sufficient time for hard dry 6-12 hours, then it should be rubbed with fine water proof emery for the required bright finish. Then remove the dust particulars on the surface by using soft cloth and apply Alltratek Putty.
# 1-5, Janapadu Road, Piduuralla Post & Mandal Guntur District., Narasaraopet, Andhra Pradesh, India